Remember again that it is not easy to find this universal CMS DVR software available in the latest version, so do not forget to share the information with friends. Click the buttons below:. The universal CMS H software installation is extremely simple , just click on the icon and follow the step by step, by clicking 'Next'.
At the end of the installation process choose the language you prefer to use. You can click on these icons and drag them to the center of the screen to view the images. At the center, the software shows all the cameras, at the bottom, there is a toolbar with log information such as date, channels, cameras, and users.
On the left side menu, you can organize the devices in groups. In this example, I separated everything by location and created the groups: 'Apartment', 'Dahua Office' and Optiview Office 'where each of the devices is located. ONVIF is a universal protocol for electronic security devices. In the right side menu, you can control PTZ cameras, adjust the picture with brightness, contrast, hue, and saturation, configure the system, use the playback menu and advanced settings.
Each of the buttons will open a menu that shows the options available for each case. The last button is used only to exit the system logout. In this menu located at the top right of the CMS H software you can check the date and time and to the percentage of CPU processing. When the system is recording, it is also possible to note the percentage of disk usage information.
In the local settings menu, you can configure the general settings for recordings, alarms, and DDNS. The center menu allows you to choose the image layout that will be displayed on the screen, with options for 1, 4, 8, 9, 13, 16, 25, 36, 64 cameras and full screen. When audio is enabled and configured on the device, you can open the channel to play it. Just click the icon to increase the volume. The bottom part of the menu shows the date, equipment, channels, connected users and the status of each device.
Whenever you need to include, delete, and change new zones zones and devices, simply click on the device manager icon on the right side menu. If this is your problem, this article is the solution. You will also have the opportunity to download the software for free. This article is very useful to solve the problem for a lot of people that just like you are also looking for a universal CMS DVR software, so please click the buttons below and share with your friends.
There are many DVRs manufactured in China that do not have a brand and often do not even have manual or monitoring software, that's the reason why people start looking for alternative software for non-branded DVRs such as a universal CMS DVR software. Let's start with a diagram that shows the installation of a DVR on the local network. In this case, it is necessary to configure it using internal IP.
For other types of DVRs, the concept is the same. Make sure that your system is connected as shown in the diagram and check if the images are appearing on the local monitor before continuing. Make sure that DVR is using the correct IP within your network, it doesn't matter if you are using another brand such as Dahua, Swann, etc. The IP configuration principle is the same. Obviously, for your particular case, the IPs will be different from the example above, the important thing is that DVR and computer are configured in the same IP network range.
I'm talking about DVR logic ports. Note that different brands of DVR can bring other nomenclatures, the important thing is to find the correct port for the application. The image below shows the DVR using port Other DVRs bring port by default. Just check the menu to make sure what is the port. Just write down the ports your DVR is using, just in case you need the information later to configure remote viewing. Use a web browser to check if the local viewing is working fine.
By viewing the DVR images using the browser, you are making sure that the IP configuration is correct and the network is working before the installation and configuration of the H CMS. This step is pretty important. Just click the link below:. Click to download. Remember again that it is not easy to find this universal CMS DVR software available in the latest version, so do not forget to share the information with friends. Click the buttons below:.
The universal CMS H software installation is extremely simple , just click on the icon and follow the step by step, by clicking "Next". It would be great to hear from someone who has solved this problem and has found a really functional DVR live viewer software package.
I have already tried five or six packages back in January , that is when I found Blue Iris, I am ready to try again. The DVRs that the company I work for are non-branded 16 channel devices that uses streaming and media ports in the setup. I wanted to run multiple instances of the application that comes with it CMS , but the app didn't support that. I downloaded CMS Pro however the password was not provided with the download. The default ones I have tried do not seem to function, Any suggestions?
To continue this discussion, please ask a new question. Get answers from your peers along with millions of IT pros who visit Spiceworks. Best Answer. View this "Best Answer" in the replies below ». Popular Topics in Physical Security.
0コメント